Effectiveness Evaluation of "Transverse Bar" Pavement Marking Pattern on the Reduction of Rear-End Collision Risk
Keywords:
Rear-end collisions, Car-following, Pavement MarkingAbstract
A possible approach to reduce the risk of rear-end collisions is to change the behaviour of road users such that one allows sufficient spacing between his/her vehicle and the leading vehicle. In this pilot project, which implemented the "Transverse Bar" pavement marking pattern on Highway No. 35 (Rama II Road), the appropriate spacing between two cars was determined to be 47 meters. Three sets of transverse bars were painted on the pavement surface on the middle and median lanes of a five-kilometre segment along; appropriate warning signs were also installed. It was found that the "Transverse Bar" pavement marking pattern contributed to larger average spacing of vehicles. The effectiveness of such an approach nevertheless decreased over time. Furthermore, the "Transverse Bar" contributed to less rear-end collisions when analysis was performed at 99.39% confidence level.
References
Pongpullponsak, A., Laosirihongthong, T. and Kuakasemboon, K., 2004, “The Study of Factors Component Relating to Road Accidents,” KMUTT Research and Development Journal, 27 (3), pp. 333 - 355. (In Thai)
Department of Public Safety, 2006, Minnesota Tailgating Pilot Project, USA.
Greibe, P., 2009, “Chevron Markings on Freeways: Effect on Speed, Gap and Safety,” Research Park, Scion-DTU, Denmark.
Lertworawanich, P., 2006, “Safe-Following Distances based on The Car-Following Model,” PIARC International Seminar on Intelligent Transport System (ITS) in Road Network Operations, Kuala Lumpur, Malaysia.
Lertworawanich, P., 2009, “Implementation of DOT Following-distance Pavement Markings in Thailand,” Proceedings of the Eastern Asia Society of Transportation Studies, Vol. 7.
Karoonsoontawong, A., Punyim, P. and Juntub, S., 2018, A Study of Rear-End Traffic Collision Risk Reduction: A Case Study of National Highway Route 35, Final Report, Thairoads Foundation, Bangkok, Thailand. (In Thai)
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 King Mongkut's University of Technology Thonburi

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Any form of contents contained in an article published in Science and Engineering Connect, including text, equations, formula, tables, figures and other forms of illustrations are copyrights of King Mongkut's University of Technology Thonburi. Reproduction of these contents in any format for commercial purpose requires a prior written consent of the Editor of the Journal.