THE STUDY AND INVESTIGATION OF DYSPROSIUM-DOPED GLASSES MADE FROM SUGARCANE LEAVES FOR WHITE LIGHT EMITTING MATERIAL
Dyprosium-Doped Sugarcane Leaf Glasses for White Light Emission
DOI:
https://doi.org/10.55766/sujst9695Keywords:
Sugarcane Leaves, Dysprosium; Glass, Photoluminescence, White-Light Emitting MaterialsAbstract
The physical, optical, and photoluminescence properties of Dy2O3-doped glasses, synthesized from sugarcane leaves using a simple melt-quenching technique, were systematically investigated in this study. Various characterization techniques such as XRD, density, refractive index, absorption spectra, FTIR, and PL spectra were employed to evaluate their properties. The absorption spectra of Dy3+-doped glasses exhibited prominent peaks at wavelengths of 451, 798, 895, 1085, 1261, and 1673 nm. Photoluminescence analysis exhibited emission and excitation spectra, with the highest peak observed at a concentration of 1.5 mol%. Additionally, the values of decay time, the CIE 1931 chromaticity, CCT, and the Y/B ratio were assessed. The findings underscore the potential of the SCDy glasses for the advancing of white-light applications
References
Ahmad, A.U., Hashim, S., and Ghoshal, S.K. (2020). Physical, thermal and absorption traits of lithium strontium zinc borate glasses: Sensitiveness on Dy³⁺ doping. Journal of Alloys and Compounds, 844:156176. https://doi.org/10.1016/j.jallcom.2020.156176
Chimalawong, P., Kirdsiri, K., Kaewkhao, J., and Limsuwan, P. (2012). Investigation on the physical and optical properties of Dy³⁺ doped soda-lime-silicate glasses. Procedia Engineering, 32:690-698. https://doi.org/10.1016/j.proeng.2012.01.1328
Chimalawong, S.P., Kaewkhao, J., Kedkaew, C., and Limsuwan, P. (2019). Optical and electronic polarizability investigation of Nd³⁺-doped soda-lime silicate glasses. Journal of Physics and Chemistry of Solids, 71(7):965-970. https://doi.org/10.1016/j.jpcs.2010.03.044
George, H., Deopa, N., Kaur, S., Prasad, A., Sreenivasulu, M., Jayasimhadri, M., and Rao, A.S. (2019). Judd-Ofelt parametrization and radiative analysis of Dy³⁺ ions doped sodium bismuth strontium phosphate glasses. Journal of Luminescence, 215:116693. https://doi.org/10.1016/j.jlumin.2019.116693
Hernández-Andrés, J., Lee, R.L., Jr., and Romero, J. (1999). Calculating correlated color temperatures across the entire gamut of daylight and skylight chromaticities. Applied Optics, 38(27):5,703-5,709. https://doi.org/10.1364/AO.38.005703
Himamaheswara Rao, V., Syam Prasad, P., Mohan Babu, M., Venkateswara Rao, P., Satyanarayana, T., Luís, F. S., and Veeraiah, N. (2018). Spectroscopic studies of Dy³⁺ ion doped tellurite glasses for solid state lasers and white LEDs. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 188:516-524. https://doi.org/10.1016/j.saa.2017.07.003
Ichoja, A., Hashim, S., Ghoshal, S.K., and Hashim, I.H. (2020). Absorption and luminescence spectral analysis of Dy³⁺-doped magnesium borate glass. Chinese Journal of Physics, 66(5):307-317.
Kaewjaeng, S., Kothan, S., Chaiphaksa, W., and Chanthima, N. (2019). High transparency La₂O₃-CaO-B₂O₃-SiO₂ glass for diagnosis X-rays shielding material application. Radiation Physics and Chemistry, 160(9):41-47. https://doi.org/10.1016/j.radphyschem.2019.03.018
Kaewkhao, J., Boonin, K., Yasaka, P., and Kim, H.J. (2015). Optical and luminescence characteristics of Eu³⁺ doped zinc bismuth borate (ZBB) glasses for red emitting device. Materials Research Bulletin, 71:37-41.
Kaewnuam, E., Wantana, N., Kim, H.J., and Kaewkhao, J. (2017). Development of lithium yttrium borate glass doped with Dy³⁺ for laser medium, W-LEDs and scintillation materials applications. Journal of Non-Crystalline Solids, 464:96-103. https://doi.org/10.1016/j.jnoncrysol.2017.03.027
Khan, I., Rooh, G., Rajaramakrishna, R., Srisittipokakun, N., Wongdeeying, C., Kiwsakunkran, N., Wantana, N., Kim, H.J., Kaewkhao, J., and Tuscharoen, S. (2019). Photoluminescence and white light generation of Dy₂O₃ doped Li₂O-BaO-Gd₂O₃-SiO₂ for white light LED. Journal of Alloys and Compounds, 774(11):244-254. https://doi.org/10.1016/j.jallcom.2018.09.156
Lontom, W., Kosittrakun, M., Weerathaworn, P., Wangsomnuk, P., and Zhu, Y.J. (2009). Impact of storage temperature and duration on sucrose catabolism in harvested sugarcane stalks. Sugar Tech, 11:146-153.
Mahingsa, N., Siristtipokakun, N., Kaewkhao, J., and Kirdsiri, K. (2023). Physical and optical properties of CuO doped in soda lime silicate glasses produced from waste glass cullet. Integrated Ferroelectrics, 238(1):238-245. https://doi.org/10.1080/10584587.2023.2234572
Monisha, M., D'Souza, A.N., Hegde, V., Prabhu, N.S., Sayyed, M.I., Lakshminarayana, G., and Kamath, S.D. (2020). Dy³⁺ doped SiO₂-B₂O₃-Al₂O₃-NaF-ZnF₂ glasses: An exploration of optical and gamma radiation shielding features. Current Applied Physics, 20(11):1,207-1,216. https://doi.org/10.1016/j.cap.2020.07.011
Nagaraja Naick, B., Reddy Prasad, V. D. S., Ratnakaram, Y. C. B. V. R. P. (2019). Judd-Ofelt analysis and luminescence studies on Dy³⁺-doped different phosphate glasses for white light emitting material applications. Optik, 192:162980. https://doi.org/10.1016/j.ijleo.2019.162980
Paopun, Y., Thanomchat, P., and Toyen, D. (2022). Analysis of biosilica in sugarcane leaves. Microscopy and Microanalysis Research, 35(2):5-9.
Pawade, V.B., Chopra, V., and Dhoble, S.J. (2020). 1 - Introduction to electronic spectroscopy of lanthanide, properties, and their applications. In Spectroscopy of Lanthanide-Doped Oxide Materials (pp. 1-20). Elsevier. https://doi.org/10.1016/B978-0-08-102935-0.00001-0
Pintori, G. and Cattaruzza, E. (2022). XPS/ESCA on glass surfaces: A useful tool for ancient and modern materials. Optical Materials: X, 13:100108. https://doi.org/10.1016/j.omx.2022.100108
Sarumaha, C.S., Kaewnuam, E., Lertloypanyachai, P., Srisittipokakun, N., Kim, H.J., Intachai, N., Kothan, S., and Kaewkhao, J. (2025). Novel Ce³⁺/Dy³⁺ co-doped RHA double-function glasses for UV protection and white light emission capability. Journal of Alloys and Compounds, 1020:179261. https://doi.org/10.1016/j.jallcom.2024.179261
Shi, B., Xie, L., Ma, B., Zhou, Z., Xu, B., and Qu, L. (2022). Preparation and properties of highly transparent SiO₂ aerogels for thermal insulation. Gels, 8(11): 744. https://doi.org/10.3390/gels8110744
Shoaib, M., Rajaramakrishna, R., Rooh, G., Chanthima, N., Kim, H.J., Saiyasombat, C., Botta, R., Nuntawong, N., Kothan, S., and Kaewkhao, J. (2020). Structural and luminescence study of Dy³⁺ doped phosphate glasses for solid state lighting applications. Optical Materials, 109:110322. https://doi.org/10.1016/j.optmat.2020.110322
Söldner, A. and König, B. (2020). Optical analysis and separation of trivalent lanthanides in deep eutectic solvents. Journal of Rare Earths, 38(7):784-792. https://doi.org/10.1016/j.jre.2019.11.001
Talewar, R. A., Mahamuda, Sk., Swapna, K., and Rao, A.S. (2019). Near UV based Dy³⁺ ions doped alkaline-earth chloro borate glasses for white LEDs and visible lasers. Optics and Laser Technology, 119:105646. https://doi.org/10.1016/j.optlastec.2019.105646
Torres-Carrasco, M., Palomo, JG., and Puertas, F. (2014). Sodium silicate solutions from dissolution of glass wastes: Statistical analysis. Materiales de Construcción, 64(314). https://doi.org/10.3989/mc.2014.05213
Vijayakumar, M., Mahesvaran, K., Dinesh, K. Patel, Arunkumar, S., and Marimuthu, K. (2014). Structural and optical properties of Dy³⁺ doped aluminofluoroborophosphate glasses for white light applications. Optical Materials, 37(C), 37. https://doi.org/10.1016/j.optmat.2014.08.015
Yotkuna, K., Chollakup, R., Imboon, T., Kannan, V., and Thongmee, S. (2021). Effect of flame retardant on the physical and mechanical properties of natural rubber and sugarcane bagasse composites. Journal of Polymer Research, 28:455. https://doi.org/10.1007/s10965-021-02805-6
Zhao, Z., Song, Y., Min, X., Liang, Y., Chai, L., and Shi, M. (2016). XPS and FTIR studies of sodium arsenate vitrification by cullet. Journal of Non-Crystalline Solids, 452:238-244. https://doi.org/10.1016/j.jnoncrysol.2016.08.028
