HYBRID LAMINATE COMPOSITE CURVE STRUCTURE AS CYLINDRICAL CONCRETE COLUMN REINFORCEMENT
DOI:
https://doi.org/10.55766/sujst-2023-05-e0870Keywords:
Jute Fabric, Curve Laminate Composite, Hybrid Composite, Compression StrengthAbstract
Composite materials are well known for their lightweight, easy to form, high elastic properties, and relatively low production costs. Laminated composites are composite materials that are widely applied in modern building structures such as aircraft walls, automotive cases, dashboards, press boards, etc. In this study, a curved laminated composite material was used as a reinforcing material surrounding the column structure. This study aims to analyze the mechanical strength of curved laminated composite materials as reinforcement for the cylindrical column concrete structure. Compressive testing of composite materials using the ASTM C39 standard. The materials used are jute fabric, e-glass, epoxy resin, and concrete aggregate. Specimens were molded using a vacuum bagging technique to minimize trapped air in the matrix. The curve shape of the laminated composite was obtained from the shape of the ASTM C39 concrete specimen with a diameter of 50 mm and a length of 150 mm. Based on the results of the study, the compressive strength of the structure increased up to 100% when the jute fabric was given up to 2 layers. Furthermore, the strength of the structure will increase up to 150% in the application of jute e-glass hybrid laminate composite.
References
Abu Shaid Sujon, M., Habib, M.A., and Abedin, M.Z. (2020). Experimental investigation of the mechanical and water absorption properties on fiber stacking sequence and orientation of jute/carbon epoxy hybrid composites. Journal of Materials Research and Technology, 9(5): 10,970-10,981. Doi:https://doi.org/10.1016/j.jmrt.2020.07.079
ACI Committee 308. (2016). ACI 308R-2016 Guide to external curing of concrete. In Aci., 108
Ali, M., Ray, B., Rokeya, B., Aleya, M., and Ahmed, Z. (2019). Potential Healing Powers with Jute Plant- A Review. International Journal of Sciences: Basic and Applied Research, 48(5):10-23.
Aslam, H.M.U., Khan, Q. uz Z., Sami, A., and Raza, A. (2021). Axial compressive behavior of damaged steel and GFRP bars reinforced concrete columns retrofitted with CFRP laminates. Composite Structures, 258(3):113206.
Blitzstein, J.K., and Hwang, J. (2015). Introduction to Probability. CRC Press. Journal of the American Statistical Association, 92(439):1,226. Doi:https://doi.org/10.2307/2965608
Bye, G. (2011). Portland Cement (3rd ed.). ICE Publishing. Doi:https://doi.org/10.1680/pc.36116
Chethan, N., Nagesh, S.N., and Sunith Babu, L. (2019). Mechanical behaviour of Kenaf-Jute-E-glass reinforced hybrid polymer composites. Materials Today: Proceedings, 46(11), 4454–4459. Doi: https://doi.org/10.1016/j.matpr.2020.09.679
Committee, A. (2014). ASTM C 39/C 39M - 01. Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens. ASTM International. Doi: https://doi.org/10.1520/C0039
Devore, J. (2012). Probability and Statistics for Engineering and the Sciences (8th ed.). Brooks/Cole.
Ganesan, K., Kailasanathan, C., Rajini, N., Ismail, S.O., Ayrilmis, N., Mohammad, F., Al-Lohedan, H.A., Tawfeek, A M., Issa, Z.A., and Aldhayan, D.M. (2021). Assessment on hybrid jute/coir fibers reinforced polyester composite with hybrid fillers under different environmental conditions. Construction and Building Materials, 301(July), 108-117. Doi: https://doi.org/10.1016/j.conbuildmat.2021.124117
Gere, J.M. (2017). Mechanics of Materials (6th ed.). Thomson Learning, Inc.
Gribniak, V., Sultani, H.A., Rimkus, A., Sokolov, A., and Torres, L. (2021). Standardised quantification of structural efficiency of hybrid reinforcement systems for developing concrete composites. Composite Structures, 274(1): 114357.
Himmelbauer, F., Winter, G., Grün, F., and Kiesling, C. (2022). VHCF properties and assessment of specimens and thin-walled component-like structures made of high-strength steel X5CrNiCuNb16-4, International Journal of Fatigue, 156(1):106645.
Huang, S., Yan, L., Bachtiar, E.V., Gao, C., and Kasal, B. (2022). Bond behaviour between flax-glass hybrid fibre reinforced epoxy composite and laminated veneer lumber joints. Journal of Building Engineering, 50(1):104207.
Islam, M.H., Islam, M.R., Dulal, M., Afroj, S., and Karim, N. (2022). The effect of surface treatments and graphene-based modifications on mechanical properties of natural jute fiber composites: A review. IScience, 25(1):103597.
Joseph, L., Kumar, P.S., Jayanarayanan, K., and Mini, K.M. (2022). Strengthening of plain concrete cylinders with hybrid composites based on basalt and sisal fiber systems. Materials Today: Proceedings, 2,444-2,448.
Kastratović, G., Grbović, A., Sedmak, A., Božić, Ž., and Sedmak, S. (2021). Composite material selection for aircraft structures based on experimental and numerical evaluation of mechanical properties. Procedia Structural Integrity, 31(1):127-133.
Khorramian, K., and Sadeghian, P. (2021). Hybrid system of longitudinal CFRP laminates and GFRP wraps for strengthening of existing circular concrete columns. Engineering Structures, 235(2020):112028. Doi: https://doi.org/10.1016/j.engstruct.2021.112028
Kilimtzidis, S., Kotzakolios, A., and Kostopoulos, V. (2023). Efficient structural optimisation of composite materials aircraft wings. Composite Structures, 303(1):116268.
Kovler, K., and Chernov, V. (2009). Types of damage in concrete structures. In Failure, distress and repair of concrete structures. Woodhead Publishing Limited, 32-56 Doi: https://doi.org/10.1533/9781845697037.1.32
Mahjoub, R., Yatim, J.M., A, M.S., Zulkarnain, N.A., and Raftari, M. (2016). The use of Kenaf fiber reinforced polymer to confine the concrete cylinder. 3(2015):459–463. Doi:https://doi.org/10.1016/j.matpr.2016.01.130
Majumder, A., Stochino, F., Farina, I., Valdes, M., Fraternali, F., and Martinelli, E. (2022). Physical and mechanical characteristics of raw jute fibers, threads and diatons. Construction and Building Materials, 326(1):126903.
Martini, Fadliah, I., and Biru, B. (2023). Kajian Perilaku Kuat Geser Tanah Terhadap Penambahan Serat Karung Goni. Civil Engineering Journal on Research and Development, 4(1):9-16.
Mohammed, A.A., Manalo, A.C., Maranan, G.B., Muttashar, M., Zhuge, Y., Vijay, P.V, and Pettigrew, J. (2019). Effectiveness of a novel composite jacket in repairing damaged reinforced concrete structures subject to flexural loads. Composite Structures, 111634. Doi: https://doi.org/10.1016/j.compstruct.2019.111634
Montgomery, D.C., and Runger, G.C. (2011). Applied Statistics and Probability for Engineers (5th ed.) John Wiley & Sons Inc.
Nagaraj, C., Mishra, D., and Reddy, J.D.P. (2020). Estimation of tensile properties of fabricated multi layered natural jute fiber reinforced e-glass composite material. Materials Today: Proceedings, 27(8):1,443-1,448. Doi: https://doi.org/10.1016/j.matpr.2020.02.864
Ouarhim, W., Essabir, H., Bensalah, M. O., Rodrigue, D., Bouhfid, R., and Qaiss, A. el kacem. (2020). Hybrid composites and intra-ply hybrid composites based on jute and glass fibers: A comparative study on moisture absorption and mechanical properties. Materials Today Communications, 22(2019):48-57. Doi:https://doi.org/10.1016/j.mtcomm.2019.100861
Ross, S.M. (2014). Introduction to Probability Models. In Introduction to Probability Models (11th ed.). Elsevier. Doi:https://doi.org/10.1016/c2013-0-11417-1
Saleem, M.H., Ali, S., Rehman, M., Hasanuzzaman, M., Rizwan, M., Irshad, S., and Shafiq, F. (2020). Jute : A Potential Candidate for Phytoremediation of Metals - A Review. Journal of Plants MDPI, 9(258):1-14.
Senthilrajan, S., Venkateshwaran, N., Naresh, K., Velmurugan, R., and Gupta, N.K. (2022). Effects of jute fiber length and weight percentage on quasi-static flexural and dynamic mechanical properties of jute/polyester composites for thin-walled structure applications. Thin-Walled Structures, 179(1):109719.
Shekar, S., and Ramachandra, M. (2018). Green Composites : A Review. Materials Today: Proceedings, 5(1):2,518-2,526. Doi:https://doi.org/10.1016/j.matpr.2017.11.034
Song, H., Liu, J., He, K., and Ahmad, W. (2021). A comprehensive overview of jute fiber reinforced cementitious composites. Case Studies in Construction Materials, 15(1):e00724.
Talikoti, R.S., and Kandekar, S.B. (2019). Strength and Durability Study of Concrete Structures Using Aramid-Fiber-Reinforced Polymer. Journal of Fibers MDPI, 7(11): 1-11. Doi:https://doi.org/10.3390/fib7020011
Townsend, T. (2020). World natural fibre production and employment. In Handbook of Natural Fibres. Elsevier Ltd. 15-36. Doi:https://doi.org/10.1016/B978-0-12-818398-4.00002-5
Wang, D., Zhang, C., Zulfikar, A.J., Mehrez, S., Huynen, I., Mahariq, I., and Elbadawy, I. (2023). Tuning layer thickness and layer arrangement in a GdMnO 3 and GdMnO 3 -MoSe 2 bi-layer absorber to cover the S , C , and X band frequency range. Surfaces and Interfaces, 36(2022):1-9. Doi:https://doi.org/10.1016/j.surfin.2022.102507
Wayadande, U., and Pol, C.B. (2018). CFRP Application in Retrofitting of RCC Column. International Research Journal of Engineering and Technology (IRJET), 5(6): 1,304-1,309.
Wei, Z., and Xu, X. (2022). Numerical study on impact resistance of novel multilevel bionic thin-walled structures. Journal of Materials Research and Technology, 16(1):1,770-1,780.
Ye, J. (2003). Laminated Composite Plates and Shells. In Laminated Composite Plates and Shells. https://doi.org/10.1007/978-1-4471-0095-9
Yu, Q., Li, X., and Gu, X. (2018). Durability of concrete with CFRP wrapping. MATEC Web Conferences, 199, 1-5.
Zimmermann, N., and Wang, P.H. (2020). A review of failure modes and fracture analysis of aircraft composite materials. Engineering Failure Analysis, 115(1):104692.
