PROPERTY IMPROVEMENT OF HEMP-ENHANCED INTERLOCKING BLOCKS WITH DURABILITY EVALUATION AND ENERGY EFFICIENCY
Hemp-enhanced Interlocking Blocks for Durability and Energy Efficiency
DOI:
https://doi.org/10.55766/sujst7161Keywords:
Concrete, Hemp, Interlocking block, Soil cement, Sustainable, WasteAbstract
This study focused on the property improvement and durability evaluation of hemp-enhanced interlocking blocks to meet the standards specified in TIS 58-2560. The blocks were produced using Type I Portland cement, soil, and hemp with a weight ratio of 1:2:0.4 and were formed using interlocking block-making machines. The properties were enhanced through the incorporation of Al2(SO4)3, natural rubber latex, and polymers. Samples were air-cured for 28 days and subjected to 12 cycles of wetting and drying, after which they were tested for compressive strength, water absorption, and dry density. Thermal properties were also evaluated to calculate the OTTV. The results demonstrated that the incorporation of 15% Al2(SO4)3 improved the compressive strength, with values of 5.41 MPa after air curing, which increased by 111.33% compared to the hemp concrete without improvement. After 12 wetting and drying cycles, compressive strength was 5.55 MPa, with both values meeting the TIS 58-2560 standards. Additionally, thermal conductivity was recorded at 0.16 w/m°C, with a specific heat capacity of 1.24 kJ/kg°C and a density of 1,260 kg/m3. The OTTV peaked at 19.97 w/m2 when the walls faced southeast, which was lower than that of red bricks, concrete blocks, and lightweight concrete blocks. These findings indicated that hemp-enhanced interlocking blocks with 15% Al2(SO4)3 not only met strength standards but also offered energy-efficient properties, making them suitable for sustainable construction. This material effectively reduced energy consumption from air conditioning due to its low OTTV values. As it utilized hemp, an agricultural waste product that would otherwise require disposal, it also contributed to waste reduction and minimized environmental impact.
References
ASTM. (2015). Standard test methods for wetting and drying compacted soil-cement mixtures (ASTM D559/D559M-15). American Society for Testing and Materials.
Demir, I., and Doğan, C. (2020). Physical and mechanical properties of hempcrete. The Open Waste Management Journal, 13:26-34. https://doi.org/10.2174/1874312902014010026
Elfordy, S., Lucas, F., Tancret, F., Scudeller, Y., and Goudet, L. (2008). Mechanical and thermal properties of lime and hemp concrete (“hempcrete”) manufactured by a projection process. Construction and Building Materials, 22(10):2116-2123. https://doi.org/10.1016/j.conbuildmat.2007.07.016
Hoy, M., Nhieu, D.V., Horpibulsuk, S., Suddeepong, A., Chinkulkijniwat, A., Buritatum, A., and Arulrajah, A. (2023b). Effect of wetting and drying cycles on mechanical strength of cement-natural rubber latex stabilized recycled concrete aggregate. Construction and Building Materials, 394:132301. https://doi.org/10.1016/j.conbuildmat.2023.132301
Hoy, M., Ro, B., Horpibulsuk, S., Suddeepong, A., Buritatum, A., Arulrajah, A., Yaowarat, T., Chinkulkijniwat, A., and Horpibulsuk, J. (2024). Flexural fatigue performance of hemp fiber-reinforced concrete using recycled concrete aggregates as a sustainable rigid pavement. Journal of Materials in Civil Engineering, 36(11):04024378. https://doi.org/10.1061/JMCEE7.MTENG-18367
Hoy, M., Tran, N.Q., Suddeepong, A., Horpibulsuk, S., Buritatum, A., Yaowarat, T., and Arulrajah, A. (2023a). Wetting-drying durability performance of cement-stabilized recycled materials and lateritic soil using natural rubber latex. Construction and Building Materials, 403:133108. https://doi.org/10.1016/j.conbuildmat.2023.133108
Huang, L., Krigsvoll, G., Johansen, F., Liu, Y., and Zhang, X. (2018). Carbon emission of global construction sector. Renewable and Sustainable Energy Reviews, 81(Part 2):1906-1916. https://doi.org/10.1016/j.rser.2017.06.001
Intata, S., Atthajariyakul, S., and Chirajoj, R. (2006). A study on the selection of materials for energy-efficient houses. Proceedings of the 2nd Conference on Energy Network of Thailand (pp. 90-95). Nakhon Ratchasima, Thailand.
Lambe, T.W., and Moh, Z.C. (1957). Improvement of strength of soil-cement with additive. Highway Research Board Bulletin, 183:38-47.
Madurwar, M.V., Ralegaonkar, R.V., and Mandavgane, S.A. (2013). Application of agro-waste for sustainable construction materials: A review. Construction and Building Materials, 38:827-878. https://doi.org/10.1016/j.conbuildmat.2012.09.011
Ministry of Energy. (2021a). Notification of the Ministry of Energy on criteria for calculations, certification of assessment results, and energy conservation building design standards for each system, overall building energy use, and renewable energy use in various building systems, B.E. 2564.
Ministry of Energy. (2021b). Notification of the Ministry of Energy on determination of building design standards for energy conservation, B.E. 2564.
Pakdee, P., and Ratnaporn, T. (2018). The experiment of heat transfer in material block made from agricultural waste integrated by cement. Journal of Architectural/Planning Research, 15(1):135-145.
Pantawee, S., Sinsiri, T., Somna, R., Akkakraisee, S., and Kuppatarat, S. (2017). Basic properties of concrete containing hemp shives as coarse aggregate. Proceedings of the 12th Annual Concrete Conference (pp. MAT-95-101). February 15-17, 2017.
Peev, P.I. (2012). Is industrial hemp a sustainable construction material? Bachelor’s thesis, VIA University College, Horsens, Denmark.
Phetcharat, S., Buntan, R., and Ruekrai, R. (2021). Applications of natural latex as additive for soil cement block production. Srinakharinwirot University Engineering Journal, 16(1):1-13.
Phetcharat, S., Buntan, R., Budcha, P., and Ruekrai, R. (2024). Enhancing the compressive strength of hemp fiber-reinforced cement and evaluating thermal protection performance. Suranaree Journal of Science and Technology, 31(5):010329(1-12). https://doi.org/10.55766/sujst-2024-05-e04266
Phetvipat, J. (2006). Legend of soil cement block and interlocking block part 2. Witthayasat lae Theknoloyi, 21(2):57-62.
Šadzevičius, R., Gurskis, V., and Ramukevičius, D. (2023). Research on the properties of concrete with hemp shives. Construction of Optimized Energy Potential, 12(1):25-32. https://doi.org/10.17512/bozpe.2023.12.03
Sinsiri, T., Thaiying, K., and Phetcharat, S. (2022). Study of mechanical properties for masonry produced using hemp and lime in the form of interlocking blocks. Proceedings of the 27th National Convention on Civil Engineering, August 24-26, Chiang Rai, Thailand.
Sukprasert, S., Phetcharat, S., and Buntan, R. (2017). The application of natural rubber and soil-cement for highway construction. [Research report], Suranaree University of Technology.
Taemthong, W. (2013). Rice Straw Insulation Sheet. KKU Research Journal, 18(3):380-390.
Thai Industrial Standards Institute. (1974). Method of sampling and testing for concrete masonry units (Standard TIS.109-2517).
Thai Industrial Standards Institute. (2017). Standard for hollow nonloadbearing concrete masonry unit (TIS.58-2560).
Thamjaree, W. (2013). Biocomposites. INNOMAG, 40(228):34-37.
Woraphut, K., Kamhangrittirong, P., Surit, S., Hancharoen, K., and Saimo, T. (2016). Wall panels from corn husk. Proceedings of the 12th Naresuan Vijai National Research Conference (pp. 511-520). Naresuan University, Phitsanulok, Thailand, July 21, 2016.
