2D FINITE ELEMENT MODEL TO UNDERSTAND THE BEHAVIOUR OF DEEP EXCAVATION WITH DIAPHRAGM WALLS AND STRUT MEMBERS
DOI:
https://doi.org/10.55766/sujst-2024-04-e04864Keywords:
Deep excavation, diaphragm wall, finite element analysis, Mohr Columb model, Strut memberAbstract
Due to the soil’s low strength and high sensitivity to deterioration, designing and building in soft soil is extremely challenging and can result in structural damage. Insufficient space in urban areas has presented a challenge to excavate deep into the earth, and it is increasing the required area for the provision of public services. The function of the diaphragm wall and supporting strut member was modeled in this study using a 2D Finite element model developed with PLAXIS2D software. The excavation was designed to stabilize and limit aging due to excavation at acceptable levels nearby buildings. The analysis took into account the soil’s indirect conduct using the Mohr-coulomb failure method. Results of the study show that up to the depth of 8 m the ground surface can be safely excavated without any structural support. Beyond this limit, soil failure occurs due to the release of vertical stress and loss of lateral support. The diaphragm wall with two strut systems is sufficient to restrict ground movement under structure loading by providing lateral stability to excavation sides. The performance of the diaphragm wall is independent of the cross-sectional shape of strut members. However, the I section is more economical.
References
Arai, Y., Kusakabe, O,, Muratam O., and Konishim S. (2008). A numerical study on ground displacement and stress during and after the installation of deep circular diaphragm walls and soil excavation. Computers and Geotechnics, 35(5):791-807. https://doi.org/10.1016/j.compgeo.2007.11.001
Bentler, D.J. (1998). Chapter 2- Review and analysis of published data on performance of deep excavation support systems. 5(5):7-82.
Bfer, G. (1985). An isoparametric joint/interface element for finite element analysis. International Journal for Numerical Methods in Engineering, 21(4):585-600. https://doi.org/10.1002/nme.1620210402
Bhanuchitra, M. and Prusty, S.B. (1985). Optimal design of the shoring system : A parametric study. In: Indian Geotechnical Conference, 2010, GEO trendz, December 16-18, 2010, p. 1-4.
Bloodworth, A. and Bloodworth, A.G. (2002). Three-dimensional analysis of tunnelling effects on structures to develop design methods, [PhD. Thesis]. University of Oxford, 236p.
Boscardin, B.M.D. and Cording, E.J. (1989). Building response to excavation‐induced settlement. Journal of Geotechnical Engineering 115(1):1-21. https://doi.org/10.1061/(ASCE)0733-9410(1989)115:1(1)
Briaud, J.-L. and Kim, N.-K. (1998). Beam-column method for tieback walls. Journal of Geotechnical and Geoenvironmental Engineering, 124(1):67-79. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:1(67)
Chabokpour, J. and Azamathulla, H.M. (2022). Numerical simulation of pollution transport and hydrodynamic characteristics through the river confluence using FLOW 3D. Water Supply, 22(10):7821-7832. https://doi.org/10.2166/ws.2022.237
Cookson, M.D. (2019). Stirk PMR. 済無No Title No Title No Title. (6):2-4.
Crocetti, R., (2016). Large-span timber structures. In: Proceedings of the World Congress on Civil, Structural, and Environmental Engineering, p. 1-23. https://doi.org/10.11159/icsenm16.124
Dinakar, K.N. and Prasad, S.K. (2014). Effect of deep excavation on adjacent buildings by diaphragm wall technique using PLAXIS. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 3:26-32.
Do, T.N., Ou, C.Y., and Chen, R.P. (2016). A study of failure mechanisms of deep excavations in soft clay using the finite element method. Computers and Geotechnics, 73:153-163. https://doi.org/10.1016/j.compgeo.2015.12.009
Do, T.-N., Ou, C.-Y., and Lim, A. (2013). Evaluation of factors of safety against basal heave for deep excavations in soft clay using the finite-element method. Journal of Geotechnical and Geoenvironmental Engineering, 139(12):2125-2135. https://doi.org/10.1061/(ASCE)
GT.1943-5606.0000940
Dong, Y.P., Burd, H.J., and Houlsby, G.T. (2016). Finite-element analysis of a deep excavation case history. Geotechnique, 66(1):1-15. https://doi.org/10.1680/jgeot.14.P.234
Felix, P., Leon, L., Gay, D., Salon, S., and Azamathulla, H. (2024). A CFD model to evaluate near-surface oil spill from a broken loading pipe in shallow coastal waters. Fluid Dynamics & Materials Processing, 20(1):59-77. https://doi.org/10.32604/fdmp.2023.028031
Finno, R.J., Atmatzidis, D.K., and Perkins, S.B. (1989). Observed performance of a deep excavation in clay. Journal of Geotechnical Engineering, 115(8):1045-1064. https://doi.org/10.1061/(ASCE)0733-9410(1989)115:8(1045)
Ghazaly, Z.M., Rahim, M.A., Hiung, V.K., Isa, N.F., and Sofri, L.A. (2017). The effect of construction stage on the development of retaining wall. In: AIP Conference Proceedings; International Conference on Advanced Material Engineering and Technology 2016, 8-9 December 2016, Kaohsiung City, Taiwanvol, p. 1835. https://doi.org/10.1063/1.4981835
Goh, A.T.C. (1990). Assessment of basal stability for braced excavation systems using the finite element method. Computers and Geotechnics, 10(4):325-338. https://doi.org/10.1016/0266-352X(90)90021-M
Gourvenec, S., Powrie, W., and De Moor, E.K. (2002).
Three-dimensional effects in the construction of a long retaining wall. In: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, 155(3):163-173. https://doi.org/10.1680/geng.2002.155.3.163
Hajialigol, S., Ahadiyan, J., Sajjadi, S.M., Hazi, M.A., Chadee, A.A., Nadian, H.A., and Kirby, J.T. (2024). Experimental analysis of turbulence measurements in a new dissipator structural (cross beams) in abruptly expanding channels. Results in Engineering, 21:101829. https://doi.org/10.1016/j.rineng.2024.101829
Hamza, M., Ata, A., and Roussin A. (1999). Ground movements due to the construction of cut-and-cover structures and slurry shield tunnel of the Cairo Metro. Tunnelling and Underground Space Technology, 14(3):281–289. https://doi.org/10.1016/S0886-7798(99)00044-9
Hsieh, P.G., Ou, C.Y., and Liu, H.T. (2008). Basal heawe analysis of excawations with consideration of anisotropic undrained strength of clay. Canadian Geotechnical Journal, 45(6):788-799. https://doi.org/10.1139/T08-006
Hsiung, B.C.B. (2009). A case study on the behaviour of a deep excavation in sand. Computers and Geotechnics, 36(4):665-675. https://doi.org/10.1016/j.compgeo.2008.10.003
Johnson, E.G. (1989). Geotechnical characteristics of the Boston area. Civil Engineering Practice Journal, 4(1):53-64.
Leung, E.H.Y. and Ng, C.W.W. (2007). Wall and ground movements associated with deep excavations supported by cast in situ wall in mixed ground conditions. Journal of Geotechnical and Geoenvironmental Engineering, 133(2):129-143. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:2(129)
Mohamed, A. (2016). Prediction of soil deformation due to diphragm wall installation prediction of soil deformation due to diaphragm wall. In: Proceeding 9th Freiberger–St. Petersburger Kolloquim für Junge Wissenschaftlte (BHT). TU Bergakademie Freiberg, Germany, p. 79-84.
Mohamed, A.A. (2013). Interaction between diaphragm wall and adjacent deep foundations. In: Conference in Resources and Geotechnics, p. 1-4.
Powrie, W. and Li, E.S.F. (1991). Finite element analyses of an in situ wall propped at formation level. Geotechnique. 41(4):499-514. https://doi.org/10.1680/geot.1991.41.4.499
Rahman, A. and Taha, M. (2005). Geotechnical performance of embdded cast-in-situ diaphragm walls for deep excavations. Slovak Journal of Civil Engineering, 3:30-38.
Simpson, B. (1992). Retaining structures: displacement and design. Geotechnique, 42(4):541-576. https://doi.org/10.1680/geot.1992.42.4.541
Sobala, D. and Rybak, J. (2017). Steel sheet piles - applications and elementary design issues. In: IOP Conference Series: Materials Science and Engineering, 245(2):022072. https://doi.org/10.1088/1757-899X/245/2/022072.
Tan, Y. and Wang, D. (2013). Characteristics of a large-scale deep foundation pit excavated by the central-island technique in shanghai soft clay. I: bottom-up construction of the central cylindrical shaft. Journal of Geotechnical and Geoenvironmental Engineering, 139(11):1875-1893. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000928
Wong, B. and Patron, L.W. (1993). Settlements induced by deep excavations in Taipei. In: Proceedings of 11th Southeast Asian Geotechnical Conference, p. 787-791.
Wong, K.S. and Broms, B.B. (1989). Lateral wall deflections of braced excavations in clay. Journal of Geotechnical Engineering, 115(6):853-870. https://doi.org/10.1061/(ASCE)0733-9410(1989)115:6(853)
Wood, L.A. and Perrin, A.J. (1984). Observations of a strutted diaphragm wall in London clay: A preliminary assessment. Geotechnique, 34(4):563-579. https://doi.org/10.1680/geot.1984.34.4.563
