INNOVATION OF GREEN CONCRETE ENHANCING PROPERTIES WITH NATURAL RUBBER LATEX, QUARRY DUST, AND CURING TECHNIQUES
DOI:
https://doi.org/10.55766/sujst-2024-02-e03230Keywords:
Cellular lightweight concrete, Microwave curing, Natural rubber latex, Quarry dustAbstract
This study investigates the development of sustainable cellular lightweight concrete (CLC) by incorporating quarry dust (QD), and natural rubber latex (NRL). CLC, known for its lightweightness and thermal insulation, traditionally consumes cement and sand, posing sustainability challenges. NRL, derived from a renewable source, and QD, a by-product, offer eco-friendly alternatives. The study explores the optimal mix proportions of NRL (3%, 5%, and 7% by weight of cement) and the influence of microwave (MW) curing. Results show that 5% of NRL enhances density and compressive strength while reducing water absorption. However, 7% of NRL exhibits trade-offs. QD substitution proved viable, promoting waste reduction. MW curing demonstrates the potential for rapid strength development. The research aligns with industry standards (TIS No.2601-2556) and introduces an environmentally conscious approach to CLC production, fostering sustainability in the construction sector.
References
Amnon, K. and Hadassa, B. (2006). Effect of High Levels of Fines Content on Concrete Properties. ACI Materials Journal, 103(6):474-482. https://doi.org/10.14359/18226
Amran, Y.H.M., Farzadnia, N., and Abang Ali, A,A. (2015). Properties and applications of foamed concrete; a review. Construction and Building Materials, 101(Part 1):990- 1005. https://doi.org/10.1016/j.conbuildmat.2015.10.112
ASTM. (2020). Standard Specification for FLow Table for Use in Tests of Hydraulic Cement.
Awoyera, P.O., Mohammed Najm, H., David Adefarati, O., Eldirderi, M.M.A., Mohamed Khedher, K., Al Dughaishi, H., Jayanthi, V., and Milad, A. (2023a). Potential of natural rubber latex in cement mortar for thermal insulating material in buildings. Frontiers in Materials, 10. https://doi.org/10.3389/fmats.2023.1152492
Awoyera, P.O., Mohammed Najm, H., David Adefarati, O., Eldirderi, M.M.A., Mohamed Khedher, K., Al Dughaishi, H., Lawati, J.A., and Milad, A. (2023b). Postfire Residual Strength and Morphology of Concrete Incorporating Natural Rubber Latex Exposed to Elevated Temperatures. Advances in Civil Engineering, 2023:9681890. https://doi.org/10.1155/2023/9681890
Chatveera, B. and Homsriprasert, W. (2011). Effect of Microwave Engergy on Compressive Strength and Durability of Cement Paste Containing Rice Husk Ash and Fly Ash. KMUTT Research & Development Journal, 34(3):279-298.
Febin, G.K., Abhirami, A., Vineetha, A.K., Manisha, V., Ramkrishnan, R., Sathyan, D., and Mini, K.M. (2019). Strength and durability properties of quarry dust powder incorporated concrete blocks. Construction and Building Materials, 228:116793. https://doi.org/10.1016/j.conbuildmat.2019.116793
Gerges, N.N., Issa, C.A., and Fawaz, S.A. (2018). Rubber concrete: Mechanical and dynamical properties. Case Studies in Construction Materials, 9:e00184. https://doi.org/10.1016/j.cscm.2018.e00184
He, L., Ma, Y., Liu, Q., and Mu, Y. (2016). Surface modification of crumb rubber and its influence on the mechanical properties of rubber-cement concrete. Construction and Building Materials, 120:403-407. https://doi.org/10.1016/j.conbuildmat.2016.05.025
Hilloulin, B. and Tran, V.Q. (2022). Using machine learning techniques for predicting autogenous shrinkage of concrete incorporating superabsorbent polymers and supplementary cementitious materials. Journal of Building Engineering, 49:104086. https://doi.org/10.1016/j.jobe.2022.104086
Huang, C., Huang, G., Li, S., Luo, M., Liu, H., Fu, X., Qu, W., and Wu, J. (2018). Research on architecture and composition of natural network in natural rubber. Polymer, 154:90-100. https://doi.org/10.1016/j.polymer.2018.08.057
Ilangovana, R., Mahendrana, N., and Nagamanib, K. (2008). Strength and durability properties of concrete containing quarry rock dust as fine aggregate. ARPN Journal of Engineering and Applied Sciences, 3(5):20-26.
Ismail, M., Muhammad, B., Yussuf, A.A., Majid, Z., and Ismail, M.E. (2011). Mechanical capabilities and fire endurance of natural rubber latex modified concrete. Canadian Journal of Civil Engineering, 38(6):661-668. https://doi.org/10.1139/l11-035
Jumrat, S., Pianroj, Y., and Karilla, S. (2020). Influence of Choice of Curing Method on the Dielectric, Thermal and Mechanical Properties of Geopolymer Mortar-Natural Rubber Latex (GM-NRL) Blends. Chiang Mai Journal of Science, 47(3):567-579.
Kujawa, W., Olewnik-Kruszkowska, E., and Nowaczyk, J. (2021). Concrete Strengthening by Introducing Polymer-Based Additives into the Cement Matrix-A Mini Review. Materials (Basel), 14(20). https://doi.org/10.3390/ma14206071
Lim, S.K., Tan, C.S., Li, B., Ling, T-C., Hossain, M.U., and Poon, C.S. (2017). Utilizing high volumes quarry wastes in the production of lightweight foamed concrete. Construction and Building Materials, 151:441-448. https://doi.org/10.1016/j.conbuildmat.2017.06.091
Makul, N., Rattanadecho, P., and Pichaicherd, A. (2017). Accelerated microwave curing of concrete: A design and performance-related experiments. Cement and Concrete Composites, 83:415-426. https://doi.org/10.1016/j.cemconcomp.2017.08.007
Makul, N. (2016). Innovative hybrid curing method for accelerating the strength of high-performance cement paste using microwave heating coupling with low-pressure processing. Construction and Building Materials, 105:245-252. https://doi.org/10.1016/j.conbuildmat.2015.12.084
Mangat, P.S., Abubakri, S., Grigoriadis, K., and Starinieri, V. (2021). Hydration and Microwave Curing Temperature Interactions of Repair Mortars. Recent Progress in Materials, 03(04):040. https://doi.org/10.21926/rpm.2104040
Miao, K., Pan, Z., Chen, A., Wei, Y., and Zhang, Y. (2023). Machine learning-based model for the ultimate strength of circular concrete-filled fiber-reinforced polymer-steel composite tube columns. Construction and Building Materials, 394:132134. https://doi.org/10.1016/j.conbuildmat.2023.132134
Muhammad, B., Ismail, M., Yussuf, A.A., and Muhammad, A.R.B. (2011). Elastomeric influence of natural rubber latex on cement mortar at high temperatures using thermal degradation analysis. Construction and Building Materials, 25(5):2223-2227. https://doi.org/10.1016/j.conbuildmat.2010.11.006
Raj, A., Sathyan, D., and Mini, K.M. (2019). Physical and functional characteristics of foam concrete: A review. Construction and Building Materials, 221:787-799. https://doi.org/10.1016/j.conbuildmat.2019.06.052
Shah, S.N., Mo, K.H., Yap, S.P., Yang, J., and Ling, T-C. (2021). Lightweight foamed concrete as a promising avenue for incorporating waste materials: A review. Resources, Conservation and Recycling, 164:105103. https://doi.org/10.1016/j.resconrec.2020.105103
Soultana, A. and Galetakis, M. (2020). Utilization of Quarry Dust and Calcareous Fly Ash for the Production of Lightweight Cellular Micro-Concrete-Synthesis and Characterization. Buildings, 10(12):214. https://doi.org/10.3390/buildings10120214
Sukmak, G., Sukmak, P., Horpibulsuk, S., Yaowarat, T., Kunchariyakun, K., Patarapaiboolchai, O., and Arulrajah, A. (2020). Physical and mechanical properties of natural rubber modified cement paste. Construction and Building Materials, 244:118319. https://doi.org/10.1016/j.conbuildmat.2020.118319
Thomas, B.S. (2018). Green concrete partially comprised of rice husk ash as a supplementary cementitious material - A comprehensive review. Renewable and Sustainable Energy Reviews, 82:3913-3923. https://doi.org/10.1016/j.rser.2017.10.081
TIS. (2013). Thai Industrial Standards Institute; Ministry of Industry Thailand, TIS No.2601-2556: Cellular lightweight concrete blocks using preformed foam (pp. 26).
Yaowarat, T., Suddeepong, A., Hoy, M., Horpibulsuk, S., Takaikaew, T., Vichitcholchai, N., Arulrajah, A., and Chinkulkijniwat, A. (2021). Improvement of flexural strength of concrete pavements using natural rubber latex. Construction and Building Materials, 282:122704. https://doi.org/10.1016/j.conbuildmat.2021.122704
