SURFACE FUNCTIONALIZATION OF LINEN FIBER AND ITS DYE-FASTNESS ASSESSMENT USING (4-[(E)-(4-AMINO-2-HYDROXYPHENYL) DIAZENYL] BENZENE- 1-SULPHONIC ACID AND 4-[(E)-(4-{(Z)-[4-(DIMETHYLAMINO) PHENYL] DIAZENYL}-2-HYDROXYPHENYL) DIAZENYL] BENZENE-1-SULPHONIC ACI
DOI:
https://doi.org/10.55766/sujst-2023-03-e03039Keywords:
Linen Fiber, Acetylation, Methylation, Benzoylation, SEM, FTIR and Dye - fastnessAbstract
Textile fibres find application in many fields, such as; Apparel manufacturing, Medical, Agriculture, Packaging, Civil construction, Shipping. Some of these fibres lack special characteristics required for some specific application without any additional treatment. Large scale production of linen fibre has been limited by the tendency of the fibre to absorb water, degradation by micro-organisms and sunlight. These factors ultimately lower the strength and the service life of the fibre. Hence, the need to improve the hydrophobicity of natural linen fibre before application. Poor dye-fibre interaction has been an area of constant interest in the textile industry. This has been expressed by bleeding, crocking, bleaching of fabric resulting to fading of the fabric. These shortcomings are sometimes due to poor treatment, manufacturing processes and customer handling. Natural linen fiber is an eco-friendly ligno-cellulosic fiber known for its strength, resistance to degradation, hydrophobicity when pointedly modified. In this research, chemical modification of scoured and bleached linen fibre by Acetylation, Methylation and Benzoylation was carried out. The chemically modified fibres were evaluated by techniques such as SEM and FTIR spectroscopy. The mechanical property (strength) was determined after each modification. The result obtained revealed an absorption band at 3432 cm-1 - 3450 cm-1 confirming the OH group in the linen fibre. The band at 704 cm-1 indicated the presence of a benzene ring from benzoyl chloride. The chemical modification changed the morphology of the linen fibre for improved dye–fibre interaction. The chemically modified species were dyed and further subjected to a dye fastness test. The results revealed at 4.33a ± 0.69, 5.00a ± 0.00 and 4.67a ± 0.58 as against3.00a±1.00, 3.33a±0.58 and 2.67a±0.58 for light fastness, wash fastness and rub fastness respectively when subjected to ANOVA analysis. In conclusion, benzoylated linen fibre was observed to most improved dye-fibre interaction.
References
Abdellatif H., Abd E., and Rady E. (2020). Facile route for the synthesis and characterization of new naphtho[2,3-f]quinoxaline-dione, trione and anthra-dione derivatives. Chem Int 2020, 6(3):122-130.
Akbari S, Asayesh A., Khaliliazar S., Razipour M., and Esmaeeli N. (2020). Chemical and physical characteristic of modified cotton and linen fabrics with amine-terminated dendritic polymer. In: Handbook of Natural Fibres, 451-467. https://doi.org/10.1016/B978-0-12-818782-1.00013-4
Akhatara, M.N., Sulongb, A.B., Radzib, M.K.F., Ismailb, N.F., Raza, M.R., Muhamad, n., Khane, M.A. (2016). Influence of alkaline treatment and fibre loading on the physical and mechanical properties of Kenaf/polypropylene composites for variety of applications. Progress in Natural Science: Materials International, 26:657-664.
Alain Dufrensne (2013). Nano cellulose: a new ageless bionanomaterial. Material Today, 16(6):220-227. https://doi.org/10.1016/j.mattod.2013.06.004
Anamaria Irinia and Cornelia Vasile (2015). Surface functionalization of cellulose fibres. Nova Science publishers Inc. In: Cellulose and cellulos Derivatives Editor: Md. Ibrahim H. mondal, 71-101. Atalie, D., Tesinova, P., Tadesse, M.G., Ferede, E., Dulgheriu, I. and Loghin, E (2021). Thermo-Physiological Comfort Properties of Sportswear with Different Combination of Inner and Outer Layers. Materials, 14:6,863. https://doi.org/10.3390/ma14226863
Borsa, J., Laszlo, K., Boguslavsky, L., Takacs E., Racz I., Toth T. and Szabo D (2016). Effect of mild alkali/ultrasound treatment on flax and hemp fibres: the different responses of the two substrates. Cellulose 23(3):2,117-2,128. https://doi.org/10.1007/s10570-016-0909-y
Bright B.M., Selvi B.J., Hassan S.A., Jaafar M.M., Suchart., Rangappa S.M., and Nagaraj B.K (2022). Characterization of Natural Cellulosic Fiber from Cocos nucifera Peduncle for Sustainable Biocomposites. Journal of Natural Fibers, 19(14):9,373-9,383. https://doi.org/10.1080/15440478.2021.1982827
Cruz, J. and Fangueir, R. (2016). Surface modification of natural fibres: a review. Procedia Engineering, 155:285-288. https://doi.org/10.1016/j.proeng.2016.08.030
Da Crus Sabastaio F., Assuncao Rosana M.N., Motta Leila A. De c., Vieira J.G., Filho G.R., Meireles C.S., Faria Fernanda A.C., Gomide D.D. and Pasquini D. (2011). Synthesis and Characterization of Methylcellulose from Cellulose Extracted from Mango Seeds for Use as a Moter Additive. Polimercs, 4:1-8. https://doi.org/10.1590/S0104-14282012005000011
Deene Manik Prabhu and Wen-Jun Li (2015). The most abundant natural resource: Cellulose and its derivativesand their applications in Ibrahim M.D and Mondal H. Cellulose and Cellulose Derivatives. Nova Science publishers, Inc. New York.
Diana Ciolacu, Florin Ciolacu, and Valentini I. Popa (2011). Armophous Cellulose - Structure and characterisation. Cellulose Chem. Technol., 45 (1-2):13-21.
Forster Amanda L., Bitter Julie L., Rosenthal Samuel Brooks Sydney and Watson Stephanie S. (2017). Photofading in cotton fibers dyed using red, yellow, and blue direct dyes during examination with microspectrophotometry (MSP), Foresic Chem., 5:72-78.
Gasiorowski, R., Rojewski Wesołek, S.D., and Wojcik, R., (2012). Influence of natural fibres chemical modifications on flammability of polyurethane composites. Przetw˛ arstwo Tworzyw 18 (3):189-193. https://doi.org/10.1016/j.compositesa.2020.106171
Jabar, J.M. (2014). Effect of rate of dyeing on the fastness properties of Indigo dyed cotton fabrics. International Refereed Multidisciplinary Journal of Contemporary Research, 2(1):25-29. Kamathe S.S. and Nennehalli B. (2021). Surface Modification of Areca Fiber by Benzoyl Peroxide and Mechanical Behaviour of Areca-Epoxy Composites. Material Science Research, 18(1):48-55. https://doi.org/10.13005/msri/180106
Kamel, M.M., Youssef, Y.A., Ali, N. F and Abdelmegiede, A. (2014). Synthesis and application of novel bifunctional pyrazol (1, 5-9) pyrimidine reactive dyes. International journal of current microbiology and applied science. 3(10), 519-530.https://doi.org/10.5901/ajis.2014.v3n5p125
Kumar A., Negi Y.S., Bhardwaj N.K and Choudhary V. (2012). Synthesis and characterization of methylcellulose/PVA Based porous composite. Carbohydrate polymer 88(4):1,364-1,372. https://doi.org/10.1016/j.carbpol.2012.02.019
Mohebby B. (2008). Application of ATR Infrared Spectroscopy in Wood acetylation. J. Agric. Sci. Technol., 10:253-259.
Momodu D.U., Adetuyi A.O., Owolabi J.B., Adepoju T.S and Apara E.O. (2020). Synthesis of Diazo Dye from Sulphanilic Acid Using 3-Aminophenol and N, N-Dimethylaniline as couplers and it Application on Linen Fibre. International Journal of Materials Chemistry and Physics, 6(1):7-13.
Otutu J.O. (2012). Dis-azo Dyes Derived from 2-methoxy-5-nitroaniline and 3-chloroaniline and their Application on Polymer Fibres. Orient. J. Chem., 28(2):787-794. https://doi.org/10.13005/ojc/280218
Oun A.A. and Rhim J.W. (2015). Preparation and characterization of sodium carboxymethyl cellulose/cotton linter cellulose nanofibril composite films. J. carbpol, 3:1-9. https://doi.org/10.1016/j.carbpol.2015.03.073
Poletto, M., Pistor, V., Zeni, M. and Zattera, A.J. (2011). Crystalline Properties and Decomposition Kinetics of Cellulose Fibers in Wood Pulp Obtained by Two Pulping Processes. Polymer Degradation and Stability, 96:679-685. https://doi.org/10.1016/j.polymdegradstab.2010.12.007
Polya M. Miladinova, Reny K. Vaseva, and Varbina R. Lukanova (2015). Synthesis and Investigation of Some Acid Azo Dyes for Wool. Journal of Chemical Technology and Metallurgy, 50(1):20-25.
Rowell, R.M. (2010). Chemical Modification of Wood, For. Prod. Abs., 4(12):363-382. https://doi.org/10.3139/9783446442504.022
Roy M.A., Mathias D.Y and Juliet S.D (2012). Alkalin treatment of Cellulose for Textile application. Journal of Carbohyd. Polymer. 5(3):245-254.
Shan B, Cui R, Zhang S, and Bingtao T. (2020). Synthesis and application of poly (vinylamine-co-acrylic acid) macromolecule dyes with high light fastness. Text Res J; 90(2):156-165.
Tavares T.D., Antunes J.C., Ferreira F. and Felgueiras H.P. (2020). Biofunctionalization of Natural Fibre-Reinforced Biocomposites for Biomedical Application. Biomolecules, 10:148. https://doi.org/10.3390/bio100010148
Tavcer, P.F., Kosir, S., and Csiszar, E. (2011). Properties of differently printed and easy-care finished linen fabrics. Color. Technol., 127(3):194-199. https://doi.org.10.1111/j.1478-4408.2011.00298.x
Titok Vladimir, Leontieva Viktor, Yurenkova vetlana, Nikitinskaya Tatiana, Baraninikova Tatiana and Khotyleva Liubov (2010). Infrared Spectroscopy of fibre flax, Journal of Natural Fibers, 7:61-69.
Turki Arwa, Oudiani asma E. I, Msahli Slam and Sakli Faouzi (2018). Infrared Spectra for Alpha Fibres Treatment with Thymol. Journal of Glycobiology, 7(1):2-8.
Vardhini Vishnu K.J., Murgan R., Selvi Tamil C and Surjit r. (2016). Optimization of alkali treatment of banana fibres on lignin removal. Indian Journal of Fibre and Textile Research, 41:156-160.
Viera, R.G.P., Rodrigues Filho, G., de Assuncao, R.M.N., Meireles, C.S., Vieira, J.G., and de Oliveira, G.S (2007). Synthesis and characterization of methyl cellulose from sugar cane bagasse cellulose. Carbohydr. Polym., 67:182.
Wang Huiqing, shao Ziqiang and Shaoyi Iv. (2011). New facile method for the heterogeneous synthesis of cyanoethyl cellulose- solvent method, and comparing with traditional method. Advanced material Research, (239-242):2,084-2,090. https://doi.org.10.4028/www.scientific.net/amr.239-
Wang P., Wu H., Zheng X., Bian L., Sun Y., Wang Z. and Li C. (2021). High-binding-fastness dye from functional extracts of keemun black tea waste for dyeing flax fabric. Society of dyers and colourist, 138(3):255-265.
