THE APPLICATION OF ANALYSIS OF VARIANCE TO DIFFERENT YTTRIUM BARIUM COPPER OXIDE SUPERCONDUCTING TRANSITION TEMPERATURE MODELING
DOI:
https://doi.org/10.55766/sujst-2023-05-e02267Keywords:
Analysis of variance (ANOVA), Critical temperature, Statistical significance, YBCO superconductorsAbstract
Extensive research has been conducted on a modeling approach that contributes to predicting the critical temperature of Yttrium barium copper oxide (YBCO) materials. Statistical significance of differences in modeling approaches requires studies that can reliably distinguish between systematic approach effects and errors resulting from modeling approach variation. In this work, we introduce analysis of variance (ANOVA) to assess the statistical significance of differences in modeling approach variation. Comparisons of obtained results with YBCO modeling approach variation data of support vector machine (SVM) and linear regression with natural logarithm transformation (LRNLT) were presented.
References
Armstrong, R.A., Eperjesi, F., and Gilmartin, B. (2002). The application of analysis of variance (ANOVA) to different experimental designs in optometry. Ophthalmic and Physiological Optics, 22:248-256. https://doi.org/10.1046/j.1475-1313.2002.00020.x.
Attaf, S., Mosbah, M.F., Fittipaldi, R., Zola, D., Pace, S., and Vecchione, A. (2012). Effect of double substitution on structural and magnetic properties of Y1-xCaxBa2(Cu1-yMgy)3O7-δ. Physica C: Superconductivity, 477:36-42. https://doi.org/10.1016/j.physc.2012.02.031.
Behera, D., Mishra, N.C., and Patnaik, K. (1997). Ag-Doping-Induced Coordination Inco patibility and Its Effect on SupercenductMty in YBCO. Journal of Superconductivity, 10(1):27-32. https://doi.org/10.1007/BF02763947.
Ben Azzouz, F., Zouaoui, M., Mani, K.D., Annabi, M., Van Tendeloo, G., and Ben Salem, M. (2006). Structure, microstructure and transport properties of B-doped YBCO system. Physica C: Superconductivity and its Applications, 442(1):13-19, https://doi.org/10.1016/j.physc.2006.03.135.
Ben Azzouz, F., Zouaoui, M., Mellekh, A., Annabi, M., Van Tendeloo, G., and Ben Salem, M. (2007). Flux pinning by Al-based nanoparticles embedded in YBCO: A transmission electron microscopic study. Physica C: Superconductivity and its Applications, 455(1-2):19-24. https://doi.org/10.1016/j.physc.2007.01.033.
Buckley, R.G., Pooke, D.M., Tallon, J.L., Presland, M.R., Flower, N.E., Staines, M.P., Johnson, H.L., Meylan, M., Williams, G.V.M., and Bowden, M. (1991). Ca- and La-substitution in YBa2Cu3O7−ξ, Y2Ba4Cu7O15−ξ and YBa2Cu4O8. Physica C: Superconductivity, 174(4-6):383-393. https://doi.org/10.1016/0921-4534(91)91574-N.
Cai, C.Z., Xiao, T.T., Tang, J.L., and Huang, S.J. (2013). Analysis of process parameters in the laser deposition of YBa2Cu3O7 superconducting films by using SVR. Physica C: Superconductivity, 493:100-103. https://doi.org/10.1016/j.physc.2013.03.038.
Cai, C.Z., Zhu, X.J., Wen, Y.F., Pei, J.F., Wang, G.L., and Zhuang, W.P. (2010). Predicting the superconducting transition temperature Tc of BiPbSrCaCuOF superconductors by using support vector regression. Journal of Superconductivity and Novel Magnetism, 23(5):737-740. https://doi.org/10.1007/s10948-010-0732-x.
Cortes, C. and Vapnik, V. (1995). Support-vector networks. Machine Learning, 20:273-297. https://doi.org/10.1007/BF00994018.
Diaconis, P. and Efron, B. (1983). Computer-intensive methods in statistics. Scientific American, 248:116-130. https://doi.org/10.1038/scientificamerican0583-116.
Efron, B. and Gong, G. (1983). A leisurely look at the bootstrap, the jackknife, and cross-validation. The American Statistician, 37:36-48. https://doi.org/10.1080/00031305.1983.10483087.
Elsabawy, K.M. (2005). Raman spectra, microstructure and superconducting properties of Sb (III)-YBCO composite superconductor, Physica C: Superconductivity, 432(3-4):263-269. https://doi.org/10.1016/j.physc.2005.09.005.
Elsabawy, K.M. (2011). Superconductivity, structure visualization, mechanical strength promotion and Raman spectra of hafnium-doped-123-YBCO synthesized via urea precursor route. Cryogenics, 51(8):452-459. https://doi.org/10.1016/j.cryogenics.2011.05.004.
Faisal, W.M. and Al-Ani, S.K. (2013). The influence of aluminum doping and oxygenation on the properties of YBa2Cu3-xAlxO6.5+δ (0≤x≥0.045) HTSC. International Journal of Nanoelectronics and Materials, 6:1-8.
Goldman, L., Debra, M.P.H., Caldera, D.L., Nussbaum, S.R., Southwick, F.S., Krogstad, D., Murray, B., Burke, D.S., O'Malley, T.A., Goroll, A.H., Caplan, C.H., Nolan, J., Carabello, B., and Slater, E.E. (1977). Multifactorial index of cardiac risk in noncardiac surgical procedures. The New England Journal of Medicine, 297:845-850. https://doi.org/10.1056/NEJM197710202971601.
Gou, X. and Schwartz, J. (2013). Fractal analysis of the role of the rough interface between Bi2Sr2CaCu2Ox filaments and the Ag matrix in the mechanical behavior of composite round wires. Superconductor Science and Technology, 26(5):055016. https://doi.org/10.1088/0953-2048/26/5/055016.
Hamidieh, K. (2018). A data-driven statistical model for predicting the critical temperature of a superconductor. Computational Materials Science, 154:346-354. https://doi.org/10.1016/j.commatsci.2018.07.052.
Huang, H.-C. and Chen, Y.-C. (2015). Survey of bio-inspired computing for information hiding. Journal of Information Hiding and Multimedia Signal Processing, 6(3):430-443.
Kowalski, N., Dash, S.S., Sémon, P., and Tremblay, A.-M. (2021). Oxygen hole content, charge-transfer gap, covalency, and cuprate superconductivity. PNAS, 118(40):e2106476118. https://doi.org/10.1073/pnas.2106476118.
Krzywinski, M. and Altman, N. (2014). Analysis of variance and blocking. Nature Methods, 11(7):699-700. https://doi.org/10.1038/nmeth.3005.
Liang, R., Bonn, D.A. and Hardy, W.N. (2006). Evaluation of CuO2 plane hole doping in YBa2Cu3O6+x single crystals. Physical Review B, 73(18):180505. https://doi.org/ 10.1103/PhysRevB.73.180505.
Lin, C.T., Li, S.X., Zhou, W., Mackenzie, A., and Liang, W.Y. (1991). Cobalt-doped YBCO single crystals and their accurate characterisation. Physica C: Superconductivity, 176(1-3):285-294, https://doi.org/10.1016/0921-4534(91)90725-E.
Mellekh, A., Zouaoui, M., Ben Azzouz, F., Annabi, M., and Salem, M.B. (2006). Nano-Al2O3 particle addition effects on YBa2Cu3Oy superconducting properties. Solid State Communications, 140(6):318-323. https://doi.org/10.1016/j.ssc.2006.08.008.
Mohanta, A. and Behera, D. (2009). Effect of Ga and Zn doping on coherent transition of YBCO superconductor. Indian Journal of Pure & Applied Physics, 47:676-680.
O’Mahony, S.M., Ren, W., Chen W., Chong, Y.X., Liu, X., Eisaki, H., Uchida, S., Hamidian, M.H., and Davis, J.C.S. (2022). On the electron pairing mechanism of copper-oxide high temperature superconductivity. PNAS, 119(37):e2207449119. https://doi.org/10.1073/pnas.2207449119.
Owolabi, T.O., Akande, K.O. and Olatunji, S.O. (2014a). Prediction of superconducting transition temperatures for Fe-based superconductors using support vector machine. vances in Physics Theories and Applications, 35:12-26.
Owolabi, T.O., Akande, K.O. and Olatunji, S.O. (2015). Estimation of superconducting transition temperature Tc for superconductors of the doped MgB2 system from the crystal lattice parameters using support vector regression. Journal of Superconductivity and Novel Magnetism, 28(1):75-81. https://doi.org/10.1007/s10948-014-2891-7.
Owolabi, T.O., Akande, K.O. and Olatunji, S.O. (2016). Application of computational intelligence technique for estimating superconducting transition temperature of YBCO superconductors. Applied Soft Computing. 43:143-149. http://dx.doi.org/doi:10.1016/j.asoc.2016.02.005.
Owolabi, T.O., Akande, K.O., and Olatunji, S.O. (2014b). Support vector machines approach for estimating work function of semiconductors: addressing the limitation of metallic plasma model. Applied Physics Research, 6(5):122-132. https://doi.org/10.5539/apr.v6n5p122.
Paturi, P. Palonen, H., and Huhtinen, H. (2012). Properties of Pr-and BZO-doped YBCO multilayers. Physics Procedia, 36(100):661-664. https://doi.org/10.1016/j.phpro.2012.06.263.
Shang, M., Feng, Q., Jiao, Y.L., Xiao, L., Zheng, M.H., Yan, Q.Z., and Ge, C.C. (2010). Optimization of the properties of codoped single-domain Y-Ba-Cu-O bulk superconductors. Physica C: Superconductivity, 470(11-12):491-495. https://doi.org/10.1016/j.physc.2010.04.005.
Tokura, Y., Torrance, J.B., Huang, T.C., and Nazzal, A.I. (1988). Broader perspective on the high temperature superconducting YBa2Cu3Oy system: the real role of the oxygen content. Physical Review B, 38(10):7,156-7,159. https://doi.org/10.1103/PhysRevB.38.7156.
Vapnik, V.N. (1995). The Nature of Statistical Learning Theory. 1st Ed. Springer New York, NY., 188p. https://doi.org/10.1007/978-1-4757-2440-0.
Varshney, D., Yogi, A., Dodiya, N., and Mansuri, I. (2011). Alkaline earth (Ca) and transition metal (Ni) doping on the transport properties of Y1-xCaxBa2(Cu1-yNiy)3O7-δ superconductors. Journal of Modern Physics, 2(08):922, https://doi.org/10.4236/jmp. 2011.28109.
Yildiz, A.R. (2013). Optimization of cutting parameters in multi-pass turning using artificial bee colony-based approach. Information Sciences, 220:399-407. https://doi.org/10.1016/j.ins.2012.07.012.
Zhang, Y. and Xu, X. (2020). Yttrium barium copper oxide superconducting transition temperature modeling through gaussian process regression. Computational Materials Science, 179:109583. https://doi.org/10.1016/j.commatsci.2020.109583.
