AN OVERVIEW ON BIOCOMPATIBILITY AND FAILURE ANALYSIS OF ACRYLONITRILE BUTADIENE STERYENE BASED LARYNGOSCOPE
An overview on Biocompatibility and Failure Analysis of ABS Based Laryngoscope
DOI:
https://doi.org/10.55766/sujst-2023-01-e01876Keywords:
Laryngoscope, ABS, Biocompatibility, Stress compatibilityAbstract
Biomaterials have risen to prominence as a material class with a wide range of medical applications. According to a thorough study undertaken over the previous decade, these innovative materials can help with a variety of health-related issues. Biomaterials and their suitability in the medical field are the subjects of this study. The objective of this paper is to review the biocompatibility and stress compatibility aspects related to the use of Acrylonitrile butadiene styrene (ABS) for medical device laryngoscope. A Laryngoscope made of Acrylonitrile butadiene styrene (ABS) material is widely used by anesthetists for anesthesia. Even though ABS is deemed a high-quality material and used in various medical applications it was considered appropriate to comprehensively review the available literature to confirm biocompatibility and stress compatibility.
References
A.A, Chevrychkina., G.A, Volkov., and A.D, Estifeev. (2017). An experimental investigation of the strength characteristics of ABS plastic under dynamic loads. Procedia Structural Integrity., 6:283-285.
A.S, de León., A, Domínguez-Calvo., and S.I, Molina. (2019). Materials with enhanced adhesive properties based on acrylonitrile-butadiene-styrene (ABS)/thermoplastic polyurethane (TPU) blends for fused filament fabrication (FFF). Elsevier Ltd, doi/10.1016/j.matdes.108044.
Alisha, L Sieminski., and Keith, J Gooch. (2000). Biomaterial-microvasculature interactions. Biomaterials., 21(22):2,233-2,241.
Anderson, J.M. (1988). inflammatory response to implants. ASAIO Trans., 34(2):101-7.
Anderson, J.M. (2001). Biological responses to materials. Annu Rev MaterRes., 31:81-110.
Anderson, J.M. (2011). Biocompatibility and the Relationship to Standards: Meaning and Scope of Biomaterials Testing. Comprehensive Biomaterials II., 4:7-29. Elsevier Ltd, doi:10.1016/B978-0-08-100691-7.00108-7.
Anoosha, N.M., Sachin, B., Hemanth, B.R., Pavan Kumar, K.P., and Yathisha, N. (2018). Tensile test and FEM Analysis of ABS material using FDM Technique., 7(6):6,658-6,663. DOI:10.15680/IJIRSET.2018.0706040.
Anthony, Xavior M., Nishanth, D., Navin, Kumar N., and Jeyapandiarajan, P. (2020). Synthesis and Testing of FGM made of ABS Plastic Material. Materials Today: Proceedings., 22:1838-1844. DOI: 10.1016/j.matpr.2020.03.018.
Asghari, F., Samiei, M.Adibkia., K, Akbarzadeh., and A, Davaran S. (2017). Biodegradable and biocompatible polymers for tissue engineering application: A review. Artif. Cells Nanomed.Biotechnol., 45:185-192.
Ashlee, Jahnke. (2020). A discussion of single-use plastics in medical settings, Reinforced Plastics., 64(4):190-192.
Bernard, M., Jubeli, E., Pungente, M.D., and Yagoubi, N. (2018). Biocompatibility of polymer-based biomaterials and medical devices-Regulations, in vitro screening and risk management. Biomater. Sci., 6, 2,025-2,053.
D, Ozdil., I, Wimpenny., H.M, Aydin., and Y, Yang. (2017). Biocompatibility of biodegradable medical polymers, Editor(s): Xiang Zhang, Science and Principles of Biodegradable and Bioresorbable Medical Polymers, Woodhead Publishing.
David, F. Williams. (2014). There is no such thing as a biocompatible material, Biomaterials., 35(38):10,009-10,014.
Fatima, Sabah., Achraf, Wahid., Abdelkarim, Kartouni., Hamid, Chakir., and Mohamed, ELghorba. (2019). Failure Analysis of Acrylonitrile Butadiene Styrene (ABS) Materials and Damage Modeling by Fracture, Int J Performability Eng., 15(9):2,285-2,293.
Fournier, E., Passirani, C., Montero-Menei, C.N., and Benoit, J.P. (2003). Biocompatibility of implantable synthetic polymeric drug carriers: focus on brain biocompatibility. Biomaterials., 24(19):3,311-31.
Habermann, V., and Waitzová, D. (1985). On the Safety Evaluation of Extracts from Synthetic Polymers used in Medicine. In: Chambers, P.L., Cholnoky, E., Chambers, C.M. (eds) Receptors and Other Targets for Toxic Substances. Archives of Toxicology.
Hacker, M., and Mikos, A. (2011). Synthetic polymers. In: Atala A, Lanza R, Thomson JA, Nerem RM (eds) Principles of regenerative medicine, 2nd edn. Academic press, Burlington.
Jacek, Andrzejewski., Amar, K. Mohanty., and Manjusri, Misra. (2020). Development of hybrid composites reinforced with biocarbon/carbon fiber system. The comparative study for PC, ABS and PC/ABS based materials, Composites Part B: Engineering., 200:108319.
Kamaljit, S Boparai., Rupinder, Singh., and Ran, Vijay Kumar. (2019). Development and Applications of Composites of Polymeric and Biodegradable Materials Since, doi:10.1016/B978-0-12-803581-8.11580-2, (1-7).
Sridharan, Kannan., and Ramamoorthy, M. (2020). Mechanical Characterization and Experimental Modal Analysis of 3D Printed ABS, PC and PC-ABS Materials. Mater. Res. Express., 7:015341.
Kulich, D.M., Gaggar, S.K., Lowry, V., and Stepien, R. (2003). Acrylonitrile-Butadiene-Styrene (ABS) Polymers. In Kirk-Othmer Encyclopedia of Chemical Technology, (Ed.).
Lin, C.C. and Anseth, K. (2013). The biodegradation of biodegradable polymeric biomaterials. In: Ratner A, Hoffman F, Schoen J, Lemons B (eds) Biomaterials science, 2nd edn. Academic press, London, pp 716-728).
Makara, Lay., Nuur, Laila Najwa Thajudin., Zuratul, Ain Abdul Hamid., Arjulizan, Rusli., Muhammad, Khalil Abdullah., and Raa, Khimi Shuib. (2019). Comparison of physical and mechanical properties of PLA, ABS and nylon 6 fabricated using fused deposition modeling and injection molding, Composites Part B: Engineering., 176:107341.
Manavitehrani, Iman., Ali, Fathi., Hesham., Badr, Sean, Daly., Ali, Negahi Shirazi., and Fariba, Dehghani. (2016). “Biomedical Applications of Biodegradable Polyesters”., 8(1):20.
Mariana, T. Farcas., Aleksandr, B. Stefaniak., Alycia, K. Knepp., Lauren, Bowers., William, K. Mandler., Michael, Kashon., Stephen, R. Jackson., Todd, A. Stueckle., Jenifer, D. Sisler., Sherri, A. Friend., Chaolong, Qi., Duane, R. Hammond., Treye, A. Thomas., Joanna, Matheson., Vincent, Castranova., and Yong, Qian. (2019). Acrylonitrile butadiene styrene (ABS) and polycarbonate (PC) filaments three-dimensional (3-D) printer emissions-induced cell toxicity, Toxicology Letters., 317:1-12.
Masoud, Mozafari., Masayuki, Yamato., and Seeram, Ramakrishna. (2019). Biomaterials: On the biocompatibility of biomaterials, Elsevier Inc., doi/10.1016/j.cobme,10.008.
Md, Fazlay Rabbi., and Vijaya, Chalivendra. (2020). Polymer Testing, Elsevier Ltd., doi/10.1016/j.polymertesting,106688.
Mikos, AG., McIntire, L.V., Anderson, JM., and Babensee, JE. (1998). Host response to tissue-engineered devices. Adv Drug Deliv Rev., 33(1-2):111-139.
Moore, J.D. (1973), Acrylonitrile- butadiene- styrene (ABS) - a review, Composites., 118-130.
Mounika, Gudeppu., Jesudas, Balasubramanian., Pramila, Bakthavachalam., Logesh, Chokkalingam., Prakash, Srinivasan., and Timiri, Shanmugam. (2020). Trends in Development of Medical Devices, Academic Press, Technology and Engineering., 216.
Nay, Win Khun., and Erjia, Liu. (2013). Thermal, mechanical and tribological properties of polycarbonate/acrylonitrile-butadiene-styrene blends, J.Polym Eng., DOI 10.1515/polyeng-2013-0039.
Park, J.B., and Bronzino, J.D. (2003). Biomaterials: Hip joint prosthesis fixation: problems and possible solutions. Biomaterials principles and applications. Boca Raton: CRC Press LLC, 219.
Peters, R., Lebouille, J., and Plum, B. (2011). Hydrolytic degradation of poly (d, l-lactide-co-glycolide 50/50) -di-acrylate network as studied by liquid chromatography-mass spectrometry. Polym Degrad Stab., 96(9):1,589-1,601.
Ratner, Buddy. and Schoen, Frederick. (2020). The Concept and Assessment of Biocompatibility. 10.1016/B978-0-08-087780-8.00052-8.
Ree, M., Shin, T.J., and Lee, S.W. (2001). Fully Rod-like Aromatic Polyimides: Structure, Properties, and Chemical Modifications. Korea Polym. J., 9:1-17.
Rickert, D., Lendlein, A., Peters, I., Moses, MA., and Franke, RP. (2006). Biocompatibility testing of novel multifunctional polymeric biomaterials for tissue engineering applications in head and neck surgery: an overview. Eur Arch Otorhinolaryngol., 263(3):215-22.
S, Inayat-Hussain., N.F, Rajab., and E.L, Siew. (2009). 20-In vitro testing of biomaterials toxicity and biocompatibility, Editor(s): Lucy Di Silvio, In Woodhead Publishing Series in Biomaterials, Cellular Response to Biomaterials, WoodheadPublishing, Pages 508-537.
S.K, Dhinesh., Prakash, S. Arun., Kumar, K.L. Senthil., and A, Megalingam. (2021). Study on flexural and tensile behavior of PLA, ABS and PLA-ABS materials,Mat Today: Proceedings., 45:1,175-1,180.
T.S, Sampath Kumar. (2013). Chapter 2 - Physical and Chemical Characterization of Biomaterials, Editor(s): Amit Bandyopadhyay, Susmita Bose, Characterization of Biomaterials, Academic Press, Pages 11-47.
Vikas, Sharma., Sahil, Kapoor., Meenakshi, Goyal., and Prashant, Jindal. (2020). Enhancement of the mechanical properties of graphene-based acrylonitrile butadiene styrene (ABS) nanocomposites, Materials Today: Proceedings., 28(3):1,744-1,747.
Vishal, Saroha., B.S, Pabla., and Dr.Sukhdev, Singh Bhogal., Characterization of ABS for Enhancement of Mechanical Properties., DOI:10.35940/ijitee.J9379.0881019:2164-2167.
Williams, D.F. (1987). Tissue-biomaterial interactions, J Mater Sci., 22:3,421-3,445.
Ziąbka, Magdalena., Michał, Dziadek., and Elżbieta, Menaszek. (2018). Biocompatibility of Poly (acrylonitrile-butadiene-styrene) Nanocomposites Modified with Silver Nanoparticles Polymers., 10(11):1257.
Zixiang, Weng., Jianlei, Wang., T, Senthil., and Lixin, Wu. (2016). Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing, Materials and Design 102. DOI- 10.1016/j.matdes.2016.04.045 0264-1275.
