MARSHALL PROPERTIES OF ASPHALT CONTAINING ALTERNATIVE FINE AGGREGATES UNDER DIFFERENT AGEING CONDITIONS
Impacts of Bus Only Lanes on Signalized Intersection
DOI:
https://doi.org/10.55766/sujst-2023-01-e01867Keywords:
Asphalt ageing, bottom ash, fine aggregate, garnetAbstract
Fine aggregate is a main asphalt component, which provides essential effect on the performance of asphalt mixture. Major consumption of aggregate for construction has caused depletion of natural resources and needs for alternative aggregate. Industrial wastes generated from manufacturing processes were laboratory evaluated as alternative fine aggregates in hot mix asphalt with variation in hardness, density and water absorption. Detailed design of the asphalt containing the potential aggregates of garnet and coal bottom ash was prepared and compared with the conventional granite aggregate using Marshall mix design method. The asphalt mixtures were tested for volumetric properties and stability under different ageing conditions. Results showed that fine aggregate has considerably affected the asphalt properties. Garnet improves the asphalt density and stability compared with other fine aggregates under both ageing conditions, thereby suggesting the suitability of garnet as an aggregate in asphalt pavement.
References
ASHTO. (2002). Standard Practice for Mixture Conditioning of Hot Mix Asphalt (HMA). Provisional Standards, American Association of State Highway and Transportation Officials, Washington, DC, AASHTO R 30; 2002.
Abdullah, M.H., Abuelgasim, R., Rashid, A.S.A., and Mohdyunus, N.Z. (2018). Engineering properties
of tanjung bin bottom ash. MATEC Web Conf. 250(01006):1-9. https://doi.org/10.1051/matecconf/201825001006.
Aletba, S.R., Hassan, N.A., Aminudin, E., Jaya, R.P. (2018). Marshall properties of asphalt mixture containing garnet waste. J. Adv. Res. Mater. Sci., 43(1):22-27. http://www.akademiabaru.com/doc/ARMSV43_N1_P22_27.pdf.
Apeagyei, A.K. (2011). Laboratory evaluation of antioxidants for asphalt binders. Constr. Build. Mater., 25(1):47-53. https://doi.org/10.1016/j.conbuildmat.2010.06.058.
ASTM. (2003). Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures. In: ASTM International, West Conshohocken, PA. ASTM D2041; 2003. p. 9-12. Available from: https://www.astm.org/Standards/D2041.htm
ASTM. (2009). Standard test method for bulk specific gravity and density of non-absorptive compacted bituminous mixtures. In: ASTM International, West Conshohocken, PA. ASTM D2726; 2009. Available from: https://www.astm.org/search/fullsite-search.html?query=D2726&.
ASTM. (2013). Standard Test Method for Penetration of Bituminous Materials. In: ASTM International, West Conshohocken, PA. ASTM D5 / D5M-13; 2013. Available from: https://www.astm.org/DATABASE.CART/HISTORICAL/D5-05.htm.
ASTM. (2014). Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer). In: ASTM International, West Conshohocken, PA [In]. ASTM D 70; 2014.
ASTM. (2015a). Standard test method for Marshall stability and flow of asphalt mixtures. In: ASTM International, West Conshohocken, PA. ASTM D6927; 2015. Available from: https://www.astm.org/search/fullsite-search.html?query=
test method for Marshall stability and flow of asphalt mixtures&.
ASTM. (2015b). Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate. In: ASTM International, West Conshohocken, PA [In]. ASTM C127, PA; 2015.
ASTM. (2015c). Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate. In: West Conshohocken, PA. ASTM C128; 2015. Available from: https://www.astm.org/Standards/C128.
ASTM. (2015d). Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer. In: ASTM International, West Conshohocken, PA. ASTM D4402 / D4402M-15; 2015. Available from: https://www.astm.org/Standards/D4402.
ASTM. (2017). Standard Test Method for Ductility of Asphalt Materials. In: ASTM International, West Conshohocken, PA. ASTM D113-17; 2017. Available from: https://www.astm.org/Standards/D113.
ASTM. (2020). Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus). In: ASTM International, West Conshohocken, PA. ASTM D36/ D36M - 14; 2020. Available from: https://www.astm.org/Standards/D36.
Bell, C.A., Wieder, A.J., and Fellin, M.J. (1994). Laboratory Aging of Asphalt-Aggregate Mixtures: Field Validation [Internet]. Strategic Highway Research Program, National Research Council, Washington, DC., 210p. Available from: http://onlinepubs.trb.org/onlinepubs/shrp/SHRP-A-390.pdf.
Chen, W., Wei, W., and Wu, S. (2009). On cold materials of pavement and high-temperature performance of asphalt concrete. Mater. Sci. Forum., 620-622:379-382. https://doi.org/10.4028/www.scientific.net/MSF.620-622.379.
Colonna, P., Berloco, N., Ranieri, V., and Shuler, S.T. (2012). Application of Bottom Ash for Pavement Binder Course. Procedia - Soc. Behav. Sci., 53:961-971. https://doi.org/10.1016/j.sbspro.2012.09.945.
Hinojosa, M.J.R., Galvín, A.P., Agrela, F., Perianes, M., and Barbudo, A. (2014). Potential use of biomass bottom ash as alternative construction material: Conflictive chemical parameters according to technical regulations. Fuel, 128:248-259. https://doi.org/10.1016/j.fuel.2014.03.017.
Jing, R., Liu, X., Varveri, A., Scarpas, A., and Erkens, S. (2018). The effect of ageing on chemical and mechanical properties of asphalt mortar. Appl. Sci. [In]., 8(11):2,231. https://doi.org/10.3390/app8112231.
JKR SPJ/2008-S4. (2008). Standard Specification For Road Works Section 4: Flexible Pavement. In: Malaysia. 2008. Available from: http://www.kkr.gov.my/en/node/34011.
Kandhal, P.S. (1992). Waste materials in hot mix asphalt - an overview. Natl. Cent. Asph. Technol., 1,193:3-16. Available from: http://www.scopus.com/inward/record.url?eid=2-s2.0-0027308591&partnerID=tZOtx3y1.Ksaibati, K. and Stephen, J. (2017). Utilization of bottom ash in asphalt mixes [Internet]. Laramie, WY; 2017. https://www.ugpti.org/resources/reports/downloads/mpc06-179.pdf.
Mohammed, S.A. and Karim, M.R. (2017). Review: Application of coal bottom ash as aggregate replacement in highway embankment, acoustic absorbing wall and asphalt mixtures. IOP Conf. Ser.: Mater. Sci. Eng., 210:012025. https://doi.org/10.1088/1757-899X/210/1/012025.
Muttashar, H.L., Ariffin, M.A.M., Hussein, M.N., Hussin, M.W., Ishaq, S.B. (20180. Self-compacting geopolymer concrete with spend garnet as sand replacement. J. Build. Eng., 15:85-94. https://doi.org/10.1016/j.jobe.2017.10.007.
Noor, W., Mior, H., and Mohamed, A. (2017). Characterization of soil mixed with garnet waste for road shoulder. IOP Conf. Ser.: Earth Environ. Sci., 220:012052. https://doi.org/10.1088/1755-1315/220/1/012052.
Olson, D.W. (2003). Industrial Garnet. US Geol Surv Miner Yearb., p. 29-31.
Roberts, F.L., Kandhal, P.S., Brown, E.R., Lee, D.-Y., and Kennedy, T.W. (1991). Hot Mix Asphalt Materials, Mixture Design And Construction [Internet]. National Asphalt Pavement Association, Research and Education Foundation, Third Edition. Lanham, MD, USA; 506p. Available from: https://trid.trb.org/view/380063.
Sen, S. and Roesler, J. (2015). Impact of pavement on the Urban Heat Island, [MSci. thesis]. University of Illinois at Urbana-Champaign, 114p.
Shang, F., Li, K., Zhang, X., and Gao, Y. (2014). Effect of fine aggregate on properties of asphalt mixture. Key Eng. Mater., 599:115-119. https://doi.org/10.4028/www.scientific.net/KEM.599.115.
Sirin, O., Paul, D.K., and Kassem, E. (2018). State of the art study on aging of asphalt mixtures and use of antioxidant additives. Adv. Civ. Eng., 2018:3428961. https://doi.org/10.1155/2018/3428961.
Sirin, O., Paul, D.K., Kassem, E., and Ohiduzzaman, M. (2017). Effect of aging on asphalt binders in the state of Qatar: A case study. Road Materials and Pavement Design, 18:215-243. https://doi.org/10.1080/14680629.2017.1389094.
Sirin, O., Paul, D.K., Kassem, E., and Ohiduzzaman, M. (2019). Evaluation of short-term aging protocol for asphalt mixtures. Appl. Sci., 9(14):2,783. https://doi.org/10.3390/app9142783.
Torkittikul, P., Nochaiya, T., Wongkeo, W., and Chaipanich, A. (2017). Utilization of coal bottom ash to improve thermal insulation of construction material. J. Mater. Cycles. Waste. Manag., [In]. 19(1):305-317. https://doi.org/10.1007/s10163-015-0419-2.
