DESIGN OF LIGHTBULB REPLACEMENT TOOLS USING KANO AND TRIZ MODEL
Keywords:
Light Bulb, LED, Design, Cano, TRIZAbstract
Lights are the most common electrical product and are often found in households. One type of lamp that are widely used in general is the Light Emiting Diode (LED) lamp. The use of this type of lamp has a life span of between 50,000-100,000 h and low electrical power between 3-10 Watts. Product improvement can be a medium to evaluate its effectiveness at a certain time. Based on this, it is necessary to make the correct design so that it will be able to meet the needs and desires of consumers. In this study, 2 product design methods were used, namely the Kano and Teoriya Resheniya Izobretatelskikh Zadatch Model (TRIZ). The subjects of this study were users of light bulb replacement tools in the parippung area of bone district, South Sulawesi. The total population of 66 people using the Slovin method with a confidence level of 90%, the sample obtained was 40 respondents. The result of this research are Based on the Kano Model calculation, 8 repair attributes are obtained. The TRIZ method, then uses the formed attributes to be processed into the TRIZ contradiction. As the result, this method can increase the comfort levels, and decrease the musculoskeletal disorders.
References
Altshuller, G. (2007). The Innovation Algorithm: TRIZ Systematic Innovation And Technical Creativity. 2nd ed. Published by Technical Innovation Center, Inc., 312p.
Faridah, F. and Umar, B. (2018). Analisis efisiensi penggunaan lampu Light Emitten Diode (LED) pada Gedung Telkom Regional VII Makassar. J. Elect. Technol., 3(1):45-52.
Hartono, M. (2016). The extended integrated model of Kansei Engineering, Kano, and TRIZ incorporating cultural differences into services. IJTech: 7(1):97-104.
Haryono, M. and Bariyah, C. (2014). Perancangan konsep produk alas kaki dengan menggunakan integrase metode Kansei Engineering dan model Kano. J. Ilmiah Teknik Indust., 13(1):71-82.
Huang, J.Y. and Tsai, P.C. (2017). Application of Kano's model and TRIZ on internet marketing for agricultural products in Taiwan. Int. J. Bus. Perform. Manage., 18(2):125-157.
Hutasuhut, A.A., Rimbawati, R., Qayyim, R.F., and Lubis, F. (2019). Analisa penurunan tingkat penurunan iluminasi system penerangan terhadap lifetime lampu. Rekayasa Elektrikal dan Energi (RELE), 1(2):93.
Kano, N., Seraku, N., Takahashi, F., and Tsuji, S. (1984). Attractive quality and must-be quality. Hinshitsu (Quality). 14(2):147-156. (in Japanese)
Kumar, A., Kuppusamy, V.K., Holuszko, M., Song, S., and Loschiavo, A. (2019). LED lamps waste in Canada: Generation and characterization. Res. Conserv. Recy., 146:329-336.
Kurnia, F. and Sobirin, M. (2020). Analisis tingkat kualitas postur pengemudi becak menggunakan metode RULA dan REBA. J. Eng. Ener. Manuf., dan Mat., 4(1):1-5.
Lathifah, A.R.A. and Widyastusti, D.A. (2018). Pengaruh green product terhadap minat pembelian ulang (studi pada produk lampu LED merek Philips). J. Enterpren. Manage. Indus. (JEMI), 1(01):16-28.
Llinares, C. and Alvaro, F. (2011). Kano's model in Kansei Engineering to evaluate subjective real estate consumer preferences. Int. J. Indus. Ergon., 41(3):233-246.
Ma, M., Chen, C., and Chang, Y. (2019). Using Kano model to differentiate between future vehicle-driving services. Int. J. Indus. Ergon., 69:142-152.
Mann, D. (2001). An Introduction to TRIZ: The theory of inventive problem solving. Blackwell Publishers Ltd., 10(2):123-125.
Maatita, Y. and Lawalata V.O. (2017). Penerapan Kano model dalam proses pengambilan keputusan penyedia fasilitas dan alternative bisnis rumah kost. Afrika., 11(2):97-108.
Maestre, M.G. and Granero, L.M. (2018). Competitioon with targeted product design: price, variety, and welfare. Int. J. Indus. Organ., 59:406-428.
Matzler, K. and Hinterhuber, H.H. (1998). How to make product development projects more successful by integrating Kano's model of customer satisfaction into quality function development. Technovation 18(1):25-38.
Prakosa, R.F. and Tontowi, A.E. (2010). Perbandingan metode rasional dengan kreatif untuk mendesin alat bantu pasang lampu. Forum Teknik, 33(2):111-124.
Purnomo, H., Janari, D., and Yudianto, T.A. (2014). Desain tas kantor wanita berbahan lembaran sabut kelapa (leskap). Spektrum Industri, 12(1):1-112.
Revantino, Mangkuto, R.A., Enge, A., Munir, F., Soelami, F.X.N., and Faridah. (2018). The effects of illuminance, colour temperature, and colour rendering of various existing Light-Emitting Diode lamps on subjective preference and performance in Indonesia. Journal of Building Engineering, 19:334-341.
San, Y.T. (2016). TRIZ: Systematic Innovation in Manufacturing. 11th Printing, Published by Firstfruits Sdn,. Bhd., Malaysia.
Sanjog, J., Patel, T., and Karmakar, S. (2019). Occupational ergonomics research and applied contextual design implementation for an industrial shop-floor workstation. Int. J. Indus. Ergono., 72:188-198.
Shahin, A., and Abedi, S., Ranjbar, M., and Kamali, A. (2017). TRIZ and the Kano model: Proposing an integrated approach for improving product quality according to customer needs. Int. J. Product. Qual. Manage., 20(3):392-404.
Svendsen, M.J., Schmidt, K.G., Holtermann, A., and Rasmussen, C.D.N. (2020). Expert panel survey among occupational health and safety professionals in Denmark for prevention and handling of musculoskeletal disorders at workplaces. Safety Science, https://doi.org/10.1016/j.ssci.2020.104932
Taifa, I.W. and Desai, D.A. (2016). Student-defined quality by Kano model: A case study of engineering students in India. Int. J. Quali. Res., 10(3):569-582.
Violante, M.G. and Vezzetti, E. (2017). Kano qualitative vs quantitative approaches: An assessment framework for products attributes analysis. Computers in Industry., 86:15-25.
