COMPARISON FOR OIL RECOVERY BETWEEN WATER AND POLYMER FLOODING IN THE U-THONG OIL FIELD

Authors

  • Theeradech Thongsumrit School of Geotechnology, Institute of Engineering, Suranaree University of Technology, 111 University Avenue, Muang District, Nakhon Ratchasima 30000, Thailand.
  • Kriangkrai Trisarn School of Geotechnology, Institute of Engineering, Suranaree University of Technology, 111 University Avenue, Muang District, Nakhon Ratchasima 30000, Thailand.

Keywords:

U-Thong oil field, water flooding, polymer flooding, reservoir simulation

Abstract

The objective of this research is to compare water and polymer flooding case studies by using a reservoir simulation to simulate the improvement of oil recovery in the reservoir of the U-Thong oil field and to study the economics of both methods to find the best case scenario. The physical properties of the reservoir rock and fluids, porosity, permeability, and reservoir pressure were collected from a literature review and theoretical assumptions. The reserve size of the reservoir is around 6.48 million barrels injected with a direct drive pattern (2 production wells and 2 injection wells) in the 1st year. Results of this research revealed that polymer flooding is the best method./, as the summary of the oil recovery factor and net present value result is 55.03% and 35.53 MMUS$, respectively (more than water flooding at 5.57% and 2.52 MMUS$, respectively).

References

Gerding, M. (1986). Fundamentals of Petroleum. Petroleum Extension Service, University of Texas, Austin, TX, USA, 280p.

Htoo, A.K. (2009). Characterization of a potential reservoir based on well-log interpretation and petrography, U-thong field, Suphan Buri basin, Thailand, [M.Sc. thesis]. Department of Geological Sciences, Faculty of Science, Chiang Mai University, Chiang Mai, Thailand, 158p.

Kanarak, J. (2011). Enhanced oil recovery with polymer flooding for oil field in Phitsanulok Basin. [M.Sc. thesis]. School of Geotechnology, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima, Thailand, 339p.

Noianusontigul, K (2008). Numerical simulation by ECLIPSE on polymer injection in the Benchamas oilfield as an EOR method using the high-performance computing cluster. [M.Sc. thesis]. School of Engineering and Technology, Asian Institute of Technology, Pathum Thani, Thailand,

Rattanapranudej, S. (2004). Improving oil recovery by water flooding in Suphan Buri Basin of Thailand. [M.Sc. thesis]. School of Geotechnology, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima, Thailand, 205p.

Schlumberger Ltd. (2009). XRD & XRF. Available from: http://www.glossary.oilfield.slb.com/search.cfm.

Tongpenyai, Y., Wattanasuksakul, U., Pattarachupong, W., Thanatit, S., and Gonecome, Y. (2000). Integrated study for U-Thong Field, Block PTTEP1, Suphan Buri Basin. Technical Service Division, PTT Exploration and Production Public Company Limited, Bangkok, Thailand, 222p.

Tuan, V. M. (2005). Monte Carlo simulation for estimating hydrocarbon reserves in U-Thong field, Suphan Buri basin, Central Thailand. [M.Sc. thesis]. Department of Geological Sciences, Faculty of Science, Chiang Mai University, Chiang Mai, Thailand, 112p.

Downloads

Published

2026-08-28

How to Cite

Thongsumrit, T., & Trisarn, K. (2026). COMPARISON FOR OIL RECOVERY BETWEEN WATER AND POLYMER FLOODING IN THE U-THONG OIL FIELD. Suranaree Journal of Science and Technology, 22(2), 143–153. retrieved from https://ph04.tci-thaijo.org/index.php/SUJST/article/view/14080

Issue

Section

Research Article